Accusplit Watch 980 301 User Manual

ACCUSPLITA940MXT  
S1/S4  
S2  
S
Wrist-Worn Stopwatch with Split Memory  
Operating Instructions  
SPLIT  
Congratulations on your purchase of an A940MXT stopwatch  
for the wrist! You’re about to enjoy the convenience of having  
professional timing right at your fingertips when you need it,  
plus a regular wristwatch whenever you don’t.  
4
: :  
03229 38  
.
.
: :  
00503 1 1  
SETUP  
S2 – Stop (Display shows “SPLIT”)  
S2 (2sec) – Reset**  
EL  
Most watches ship with a battery inter-  
rupt in place to save battery life. Turn the  
watch over and use a quarter or nickle  
to twist open the battery compartment  
hatch. Remove clear plastic strip from  
underneath the battery. Replace the bat-  
tery, taking care to ensure that the posi-  
tive (+) terminal is facing up. Replace the  
battery compartment hatch and tighten  
with the coin, making sure that the small  
arrow points to the dot at the top of the  
watch case when you are finished. Peel  
the simulated display sticker off the  
watch face.  
S3 & M  
EL Backlight  
Button  
Dual Split Memory with Split Counter  
When timing an activity with pauses  
or repeated events, you will need to  
use split timing with memories.  
S2 – Start (Shows Running DUALTime)  
S2 – Split* (Top shows CUM 1, Bottom  
shows LAP 1)  
925MX  
TURBO  
When a Distance or Sample Count Is set  
InTurbo Set Up mode, SPD (Speed)  
indicator will be illuninated at bottom of  
display. The number you enter should  
correspond to the Distance or Sample  
Count you want to use for the Speed  
or Rate Computation. “P-HR” in display  
means watch is set to compute “per  
Hour” rate, and “P-Mn” means watch is  
set to compute a “per Minute” rate.  
S2 – Split* (shows CUM 2, Bottom shows  
LAP 2)  
S2 – Split* (Top shows CUM 3, Bottom  
shows LAP 3)  
S2 – Split* (Top shows CUM 4, Bottom  
shows LAP 4)  
S2 (2sec) – Reset**  
*Split Counter always shows Current Split  
Note: You can always press S1/S4 to return  
to Running Time.  
Your new watch has four modes of  
operation: 1/100th second Memory  
Stopwatch withTurbo features, a Dual  
Set-PointTimer, plus twoTime-of-Day/  
Date/Alarm modes. When the battery is  
enabled, your watch will come to life in  
stopwatch mode. Press the ( button to  
cycle between the modes.  
If you want the watch to compute in “per  
Sec” rate, divide the Distance or Sample  
Count (Strokes, Strides, Units, etc.) by  
60, then enter it.  
Memory Review (before Resetting)  
M – Review* (Bottom shows AVE LAP  
Split,Top showsTOTAL ELAPSEDTIME)  
M – Review (Shows last DUAL Split)  
M – Review (Shows next DUAL Split, in  
reverse order)  
For example, lets say that you are at a  
race track with a course that is one mile  
long. If you set the Distance to 1.00 and  
the rate to “P-HR,” and then time several  
laps, the Average Speed recorded by the  
watch will be in miles per hour.  
Speed/Rate Function Operation  
S2 – Start (Shows Running LAPTime)  
S2 – Split* (Top and Bottom show  
SPEED/RATE 1/LAP 1)  
S2 – Split* (Top and Bottom show  
SPEED/RATE 2/LAP 2)  
S2 – Split* (Top and Bottom show  
SPEED/RATE 3/LAP 3)  
S2 (2sec) – Reset LAP and SPEED/RATE  
to zero**  
*For only chance to view Total Average  
Speed/Rate, push M.  
Your watch also has an Electro-Lumines-  
cent (EL) backlight. Press the EL button  
to activate the backlight.  
*Reviews at any time in reverse numerical  
order. Hold down for Rapid Review.  
STOPWATCH MODE  
STOPWATCH AND SPEED/RATE  
The advanced “Turbo” functions on  
the watch calculate speed or rate once  
distance has been input into the watch  
(recall that Rate = Units/Time).  
The watch features a professional timing  
circuit with powerful stopwatch features.  
This is how the display looks when in  
stopwatch mode.  
S
S
Split Counter  
Turbo  
SPLIT  
Set up  
Display  
p-hr  
4
: :  
03229 38  
.
.
: :  
00503 1 1  
0 00 0000  
.
DIST  
Memory Review (before Resetting)  
M – Review* (Bottom shows AVE  
TOTAL SPEED/RATE,Top showsTOTAL  
ELAPSEDTIME)  
M – Review* (Bottom shows AVE LAP  
Split,Top showsTOTAL ELAPSEDTIME)  
M – Review (Shows last SPEED/RATE  
and LAP Split)  
M – Review (Shows next SPEED/RATE  
and LAP Split, in reverse order)  
*Reviews at any time in reverse numerical  
order. Hold down for Rapid Review.  
EL  
EL  
Split Time  
LapTime  
Master Reset  
Speed/Rate Function Setting  
S1(2sec) - EnterTurbo (Speed/Rate) Set  
Function  
S1(4sec) – Enter set function and Reset  
Turbo fields to zero (as for DUAL  
SPLIT timing)  
S2 – Select field to be Set (field will  
flash)  
S3 – Set field to Desired Setting  
S4 – Exit Setting Function  
Its a good idea to reset the stopwatch  
each time before use. Push S2 for 2 sec-  
onds to Reset**  
EventTiming  
Event timing is the simplest form of tim-  
ing. It is good when you want to mea-  
sure the total time from the start to the  
finish of a particular event.  
S2 – Start  
**Reset before 30 hrs. (end of range) and  
rollover.  
980-301  
ACCUSPLIT, Inc. • 6120 Stoneridge Mall Rd., Suite 210 • Pleasanton, CA 94588 USA  
 

3D Connexion Two Way Radio C11C536011 User Manual
Aiwa CD Player XR M131 User Manual
Alamo Lawn Mower SM72 User Manual
Allied Telesis Network Card AT iMG616BD User Manual
Amcor Air Conditioner AMC 10KM 410 User Manual
Aspire Digital Laptop 1360 User Manual
Axis Communications Security Camera Axis 210A User Manual
Badger Basket Baby Furniture 09970 User Manual
Baldor Portable Generator MN2410 User Manual
Behringer Music Pedal UF300 User Manual