Accusplit Watch AX810TT User Manual

Back light  
and Setting  
TIME TIMER  
0
Start,  
Stop, &  
Reset  
Timer  
Watch Plus  
30  
Change  
Modes  
30M  
WATER RESIST  
“the difference is the disk”  
Introduction  
Using the Timer  
Congratulations on your purchase of theTimeTimer  
Watch Plus™! No other tool communicates the concept  
of elapsed time as well as theTimeTimer.TimeTimer  
reinforces the sense of elapsed time with a graphic  
depiction of the time remaining.  
Press the MODE button (lower  
left) until you see theTime  
Timers red dial.  
Press  
Once to  
Start and  
Twice  
quickly  
to Stop.  
TIME TIMER  
The timer can be set any-  
where from one minute up  
to 12 hours.There is both an  
audible alarm and also a pre-  
alarm to let you know when  
time is running out or has  
expired.  
0
For years,TimeTimer desktop timers have been used  
effectively to help teachers, business people, and students  
of all ability levels manage their time more effectively.  
With the newTimeTimer Watch Plus, you can have more  
flexibility and portability in time management than ever  
before.  
Press  
and  
Hold  
to  
30  
The watch comes from the  
factory with the timer set to  
one hour (indicated by 1:00  
in the middle of display), and  
the audible alarms set to OFF.  
Reset.  
30M  
WATER RESIST  
Understanding the Watch  
TheTimeTimer Watch Plus has two modes of operation  
–Timer andTime of Day.To change between modes, press  
the MODE button (lower left).  
To change the settings, see instructions below.  
To Start the timer, press theTIMER button (upper right).  
To Stop the timer, press theTIMER buttonTWICE, in rapid  
succession (press the button twice within ½ second).  
To Reset the timer, press and hold theTIMER button for at  
least 2 seconds.  
TheTimer mode provides a graphical count down timer,  
using the patentedTimeTimer technology. A red disk  
surrounds digits – both represent the time remaining.  
The disk and digital display both diminish as time elapses  
until no red is visible on the timer face, and the digits read  
“0:00.Time elapses in a clockwise direction. When active,  
the Pre-Alarm and Alarm sound to let you know that time  
is running out or has expired.  
If turned ON, the Alarm will sound when time expires.The alarm  
sounds for 5 seconds, or until cancelled by pressing any button.  
If turned ON, the Pre-Alarm will sound according to the schedule  
shown below (note that Pre-Alarm can be used only if Alarm is  
also being used).  
TIME TIMER  
TIME TIMER  
TIME TIMER  
0
0
0
Table of Pre-Alarm vs Time Setting  
Time Set  
< 3 min  
Pre-Alarm at last:  
10 sec  
30  
30  
30  
30M  
WATER RESIST  
30M  
WATER RESIST  
30M  
WATER RESIST  
3 - 10 min  
10 - 30 min  
> 30 min  
30 sec  
1 min  
5 min  
59 minutes  
remaining  
45 minutes  
remaining  
Times up  
Suggested Applications  
In the workplace,TimeTimers can be used to:  
Time of Day uses a traditional “analog” watch face to  
show the current time, along with a digital display of time.  
The watch also includes aTime of Day Alarm.  
Time seminars, meetings, panel discussions and presentations  
Quantify time left before appointments and deadlines  
Monitor break time  
Manage progress toward goals and agenda items  
Oversee skills tests  
Regulate study time, computer time and play time  
Measure “time out”  
#998-310A  
The watch also comes with a convenient back light, to  
help you see the display in low light conditions. Press the  
LIGHT button (upper left) to turn on the back light.  
 
From Hour setting mode, press S2 once to enter Minute  
setting. Minute hand and digits will be flashing. Set  
current Minutes using the S3 buttons.  
Manufactured for  
TimeTimer, Inc.  
7707 Camargo Road  
Cincinnati, OH 45243  
From Minute set, press S2 once to enter Second setting.  
The second hand will be flashing. Press either S3 button  
to reset seconds to zero.  
(513) 561-4199  
Fax (513) 561-4699  
From Seconds set, press S2 once to enter Alarm setting.  
The letters ALwill be flashing, and you will also notice  
that the watch hands have disappeared.You can turn the  
Time of Day alarm On or Off by pressing either S3 button.  
When On, you will see a small Alarm Bell \ next to the  
AL indicator.  
1-877-771-TIME  
(1-877-771-8463)  
U. S. PATENT NO. D369, 619 & 5,662,479  
From Alarm On/Off, press S2 once to enter Alarm Hours  
setting.The ALindicator and the Hours digits will be  
flashing, and the clock hands will not be visible. Use  
the S3 buttons to set the desired Alarm Hour setting.  
REGISTER NOW.  
Email __________________________  
User ___________________________  
_______________________________  
_______________________________  
Please return your AX810TT  
registration to the Repair Center  
address in the warranty, and we  
will let you know about future  
products.  
From Alarm Hours, press S2 once to enter Alarm Minutes  
setting.The ALindicator and the Minutes digits will be  
flashing, and the clock hands will not be visible. Use the  
S3 buttons to set the desired Alarm Minutes setting.  
5 YEAR NO-PROOF-OF-PURCHASE LIMITED WARRANTY  
Free service for first year (see back of watch for date).  
$15 fee applies thereafter. Return unit with daytime phone number to:  
AST Repair Center, 3090 Independence Drive, Suite 148  
Livermore, CA 94551 USA 800-935-1996 • 925-290-1900  
www.ACCUSPLIT.com • support@ACCUSPLIT.com  
From any of the setting fields, press S4 once (upper left)  
to exit setting mode. Leaving the watch unattended for  
30 seconds in set mode causes it to save any changes  
and then exit set mode.  
Changing the Battery  
When the display grows dim or goes out entirely, it is  
time for a new battery. Using a small Phillips head  
jewelers screwdriver, remove the four screws holding  
back of watch onto case. Gently slide the old battery  
from its slot, and replace with new CR2025 Lithium  
battery. Make sure that the positive (“+”) terminal side  
is facing up.  
Power Reset  
You can reset the watch to original factory settings by  
pressing S3+ and S3– (the two lower buttons) together,  
and holding for at least five seconds.  
Developed by Time Timer LLC, in cooperation with Abilitations.  
 

3Com Network Card 5102M FBP User Manual
3Com Water System ENTERPRISE OS 113 User Manual
3M Grinder 20237 User Manual
Addonics Technologies Network Card ADN1GEX34 User Manual
Aiphone Film Camera GFK PS User Manual
Allied Telesis Switch 261 User Manual
Alto Shaam Oven 1018ESi User Manual
American Dryer Corp Clothes Dryer AD 75D II User Manual
Audiovox Automobile Alarm AX 500 User Manual
Behringer Car Speaker B1220DSP User Manual